Video HowTo: Cherry MX stem&spring swap

A switch is held together by four latches (two to each side). The video shows how you can pop the switch open in 3 easy steps. I did this with a french Goupil G80-1861 keyboard which originally used MX Black linear switches. A Cherry G80-1000 served as a donor for MX Blue stems and springs.

Goupil G80-1861 stem & spring swap from Bojan Kotur on Vimeo.

The end result:

HTPC Cooling

I finally got my hands on one Scythe 100x100x12mm slim fan. It turns at roughly 1000rpm and practically cannot be heard. It only moves 15 CFM which means that the PC now gets hotter than before - approximately 60C . This is quite alright as far as I'm concerned so I'll leave it as is (for now).

HTC Touch Diamond 2 problem

This phone has been nothing but trouble since I got it. The joy of owning a sparkling new phone lasted just about 2 days. My first problem was that from time the time the phone just couldn't be woken up without removing and reinserting the battery. This turned out to be a software problem which I fixed after a while.

My second problem is that the "SMS received" sound sometimes doens't play until I turn on the screen. What's that all about? Probably firmware related...

The third and biggest problem is that the receiver speaker is acting up and I sometimes can't hear a thing. This cold be due to a cold solder joint or it could be a bad speaker. Definitely something I can't solve myself so I'll have the phone repaired. Hope it doesn't last long.

AT5IONT-I fanless? Forget it!

Last night we watched a full HD movie and were in for an unpleasant surprise. Just when the movie was about to end, the computer turned itself right off. I suspected overheating so I checked the temperature readings in BIOS and they were extremely high (79C)! To solve the problem I temporarily mounted a slim 60mm AMD stock fan above the heatsink. Since it doesn't cover the whole heatsink, a real solution would be getting a slim 100mm fan which I'm going to have to order from the UK.



Conclusion: The board obviously cannot rely solely on passive cooling, at least not in a slim desktop case. You will have to provide for adequate ventilation or face potential problems with overheating.

Project HTPC

I recently bought a new TV since the old one didn't have a DVB-T receiver. Buying just the receiver was out of the question because that would leave me with an ancient TV and bad picture quality. HDMI was the only way to go so I decided to build a proper HTPC capable of HD video playback.

A year ago I found a really good deal on Travla C137 case. Now I was finally able to put it to good use. Deciding which motherboard to buy took some more research. In the end I decided to go for an ASUS AT5IONT-I since I already had two 1GB DDR3 SO-DIMM sticks lying around and the board had the best CPU/GPU combo. On top of that, I bought a Western Digital Caviar Green 500GB hard drive which fit nicely inside the case. Low power consuption and silent operation make this drive ideal for such projects. Of course a HTPC wouldn't be complete without a remote control! After some fiddling with the drivers I was able to make the old ATi Remote Wonder work and it does the job fine.

The last thing to do was to choose the OS. I was deciding between XBMC and Windows 7. A couple of my co-workers convinced me to try Win7 so I did. All I can say at the moment is "so far so good".

Photo: link

Old Game Boy Newspaper Ad

Notebook Surgery

I recently bought a used Toshiba Satellite A210-128 (AMD Turion X2 TL-56) with a busted display panel. The replacement was bought from this eBay store and it turned out great. It took me about an hour and a half to disassemble the laptop, replace the panel and put everything back together (the disassembly instructions can be found here). I wasn't sure, if the new panel would work but all my fears vanished as soon as I pushed the power button and the Toshiba logo showed up on screen.

Note: if you happen to be looking for a solid used notebook, I have one for sale ;)

This just in...

NIB Lexmark (IBM) Model M Spacer Saver! French layout.

Red Esc, Lavender WASD

What am I talking about? Why, keycaps of course! Last month I ordered some colored keycaps and here they are: red Escape key and lavender W, A, S, D keys for IBM Model M. What do you think? Pretty nifty, eh? I borrowed the idea from Filco.

Crazy About Keyboards

Just picked up another IBM Model M this weekend, bringing my keyboard count up to nine. Took me a while to clean but it looks almost like new now. Here's what I have:

- IBM Model M - YU layout, 1993
- IBM Model M - DE layout (Ambra)
- IBM Model M - US layout, 1989
- IBM Model M - YU layout, broken
- IBM Model M - YU layout, 1996
- IBM Terminal Board - YU layout
- Cherry MX1800, DE layout, MX blue
- Cherry G80, YU layout, MX blue
- NeXT Station, non-ADB, YU layout