nanoPC: scrapped

Unfortunately, the mainboard is toast and I can't get a replacement which takes me back to the drawing board. Since getting a new nano-ITX mainboard would cost me a small fortune, I decided to go back to mini-ITX. The new HTPC will be based on Atom dual core and nVidia Ion chipset which should allow for smooth 1080p playback. Next in line is also a 32" LCD TV. Lets hope it all works out nicely.

nanoPC: follow-up

The board turned out to be problematic (probably a bad memory slot) so I had to return it. Thankfully it was still under warranty and I'm now waiting for the replacement. I'll keep you posted.

nanoPC: near completion

As you can see from the pictures, my nanoPC is now assembled. I still need to add a remote control and a fan controller for the CPU fan. I had a lot of problems installing the components because the case is so small. If you're using a SATA hard drive, installation will be more difficult because the SATA connector sticks out more than a flat IDE cable connector. Forget the angled connectors as there is not enough space between the bottom of the case and the hard drive so it simply won't fit. I believe the same goes for round IDE cables.

The biggest problem of all was the supplied ATX cable which comes with a full-size 20-pin ATX connector. Why they don't supply you with this cable is beyond me. It is inexpensive and clearly takes up much less space in the already crowded case. On a side note, I managed to cram an Intel miniPCI wireless card in there. In order to do that, I had to shorten the screws which stick out from the bottom of the case.

As for the OS, I'm going to give Ubuntu 9.04 a try. Hopefully, hardware is well supported. Keep your fingers crossed!

nano-ITX preview

nano-ITX project

I now have just about everything I need to start my HTPC project:

+ Via Epia N10000E Nano-ITX
+ 1GB PC2700 Kingston SODIMM
+ Seagate 120GB SATA disk 3.5"
+ Silverstone Lascala LC08 ohišje
+ ATi Remote Wonder remote control

Still need a slim DVD-RW drive, a mini-PCI wireless card and an S-Video cable...

Codename Soyuz

Back in 2006 I completed my first mini-ITX project using a Via Epia MII10000 motherboard and a HP Apollo workstation case. Now I'm warming up for another similar project which I decided to name Soyuz. It'll be a miniature PC based on a Via Epia NL10000G nano-ITX motherboard. I still don't know what I'm going to use it for when it's finished, but building it is sure going to be fun! For those of you unfamiliar with the mentioned motherboard, it measures only 12x12 cm, features a 1 GHz low-power Eden CPU, one SO-DIMM slot (up to 1GB) and a lot of other goodies. Unfortunately onboard video is still seriously underpowered. The rest should do just fine for Linux or WinXP.