Showing posts with label HTPC. Show all posts
Showing posts with label HTPC. Show all posts

Tuesday, February 28, 2012

HTPC Cooling Part III.

About a year ago I wrote about how I solved the problem of my HTPC overheating. Well, after recently upgrading RAM to 4GB it seemed like a good idea to come up with a better solution. So I did.

Mod #1: Cable ties! The existing fan was perfect so I used cable ties to attach it to the heat pipes.

Fast, easy, neat and works like a charm!

Mod #2: Case fan also needed silencing. On the first try I used a thermistor. Have yet to see, if this is a satisfying solution.

HTPC Cooling - Part III.

Tuesday, January 25, 2011

HTPC Cooling

I finally got my hands on one Scythe 100x100x12mm slim fan. It turns at roughly 1000rpm and practically cannot be heard. It only moves 15 CFM which means that the PC now gets hotter than before - approximately 60C . This is quite alright as far as I'm concerned so I'll leave it as is (for now).

Thursday, December 30, 2010

Project HTPC

I recently bought a new TV since the old one didn't have a DVB-T receiver. Buying just the receiver was out of the question because that would leave me with an ancient TV and bad picture quality. HDMI was the only way to go so I decided to build a proper HTPC capable of HD video playback.

A year ago I found a really good deal on Travla C137 case. Now I was finally able to put it to good use. Deciding which motherboard to buy took some more research. In the end I decided to go for an ASUS AT5IONT-I since I already had two 1GB DDR3 SO-DIMM sticks lying around and the board had the best CPU/GPU combo. On top of that, I bought a Western Digital Caviar Green 500GB hard drive which fit nicely inside the case. Low power consuption and silent operation make this drive ideal for such projects. Of course a HTPC wouldn't be complete without a remote control! After some fiddling with the drivers I was able to make the old ATi Remote Wonder work and it does the job fine.

The last thing to do was to choose the OS. I was deciding between XBMC and Windows 7. A couple of my co-workers convinced me to try Win7 so I did. All I can say at the moment is "so far so good".

Photo: link

Thursday, October 29, 2009

nanoPC: follow-up

The board turned out to be problematic (probably a bad memory slot) so I had to return it. Thankfully it was still under warranty and I'm now waiting for the replacement. I'll keep you posted.

Wednesday, October 14, 2009

nanoPC: near completion

As you can see from the pictures, my nanoPC is now assembled. I still need to add a remote control and a fan controller for the CPU fan. I had a lot of problems installing the components because the case is so small. If you're using a SATA hard drive, installation will be more difficult because the SATA connector sticks out more than a flat IDE cable connector. Forget the angled connectors as there is not enough space between the bottom of the case and the hard drive so it simply won't fit. I believe the same goes for round IDE cables.

The biggest problem of all was the supplied ATX cable which comes with a full-size 20-pin ATX connector. Why they don't supply you with this cable is beyond me. It is inexpensive and clearly takes up much less space in the already crowded case. On a side note, I managed to cram an Intel miniPCI wireless card in there. In order to do that, I had to shorten the screws which stick out from the bottom of the case.

As for the OS, I'm going to give Ubuntu 9.04 a try. Hopefully, hardware is well supported. Keep your fingers crossed!



Monday, October 12, 2009

Thursday, October 8, 2009

nano-ITX project

I now have just about everything I need to start my HTPC project:

+ Via Epia N10000E Nano-ITX
+ 1GB PC2700 Kingston SODIMM
+ Seagate 120GB SATA disk 3.5"
+ Silverstone Lascala LC08 ohišje
+ ATi Remote Wonder remote control

Still need a slim DVD-RW drive, a mini-PCI wireless card and an S-Video cable...